Precision Diamond Band Saws BS270 VX

for use in industrial production

The diamond band saw BS270 VX is a reinforced, extra sturdy band saw. The X table with four-point bearing caters for work pieces of up to 100 kg in weight. The diamond band saw BS270 VX is equipped with a ball screw drive unit for the X table. The travels and feed velocities are programmable, and the table can be positioned by means of the buttons of the Mitsubishi control system.

Available options

Y-axis square

Work piece square with linear guides in Y direction, with an adjusting range of 210 mm. The square is positioned by means of a manually operated wheel. The position of the square is indicated by a digital display with an accuracy of 0.01 mm.

 

Coolant system

Collecting tray with outlet to the coolant tank. The coolant pump is controlled automatically.

 

Band cleaning

The band is cleaned with a high-pressure spray nozzle unit. The band is cleaned just before it cuts the material, as the high-pressure cleaning system of the saw band is located below the cutting point.

 

Filter insert

Bulged grate holding the filter fleece, which can be replaced, if required


Technical data BS270 VX

Length: 1800 mm
Width: 1150 mm
Height: 1740 mm
Gap: 195 mm x 255 mm
Working area (X / Y axis): 500 mm, 210 mm

 

 

Deflection rollers Ø: 266 mm
Guide rollers Ø: 47 mm
Standard band Ø: 0.7 mm x 8 mm, length 1870 mm
Band speed: 25 - 2500 m/min
Drive: 750 W three-phase motor
Weight: 200 kg