Precision Diamond Band Saws BS270 S

for use in laboratory and in production

The diamond band saw BS270 S does not feature a control system. The machine is operated manually and can be tilted by means of an adjusting screw, so that the X table with linear guides is moved by its own weight.

Available options

Y –axis square

Manually positionable Y direction square, sliding on the X table (with clamping mechanism). For the cutting of slides, the work piece can be clamped on the table and moved parallel to the clamping system.

 

Y- table

work piece table with linear guidance in Y direction, with drill template for the clamping of work pieces. The table has a feed travel of 210 mm and is positioned by means of a manually operated wheel. The position of the table is indicated by a digital display with an accuracy of 0.01 mm.

 

Coolant system

Collecting tray with outlet to the coolant tank. The coolant pump is controlled automatically.

 

Band cleaning

The band is cleaned with a high-pressure spray nozzle unit. The band is cleaned just before it cuts the material, as the high-pressure cleaning system of the saw band is located below the cutting point.

 

Machine stand

Machine stand for the BS270 table model without coolant system for installation on a level ground.

 

Filter insert

Bulged grate holding the filter fleece, which can be replaced, if required.


Technical data BS270 S

Length: 1260 mm
Width: 825 mm
Height: 1840 mm
Gap: 195 mm x 255 mm
Working area (X / Y axis): 400 mm, 210 mm

 

 

Deflection rollers Ø: 266 mm
Guide rollers Ø: 47 mm
Standard band Ø: 0.7 mm x 8 mm, length 1870 mm
Band speed: 25 - 2500 m/min
Drive: 750 W three-phase motor
Weight: 110 kg